Aluminium Partition Price in Hyderabad (2026 Cost Guide)

Aluminium Partition Price per Square Foot in Hyderabad (2026)

Expect to pay between Rs 350 and Rs 1,200 per square foot for aluminium partitions in Hyderabad, depending on the frame and infill you choose. These are supply-and-install rates common across Madhapur, Kondapur, Banjara Hills, Kukatpally and Secunderabad as of 2026, and they assume a professional site measurement rather than a rough phone estimate.

• Basic aluminium frame with 5mm plain glass: Rs 350 to Rs 500 per sq ft
• Aluminium frame with gypsum, MDF or ACP board infill: Rs 400 to Rs 600 per sq ft
• Powder-coated frame with 8mm to 10mm toughened glass: Rs 600 to Rs 850 per sq ft
• Double-glazed or acoustic office partition: Rs 900 to Rs 1,200 per sq ft
• Full-height frameless-look glazed partition with slim aluminium sections: Rs 1,000 to Rs 1,400 per sq ft

Labour and installation in the twin cities usually add Rs 40 to Rs 90 per sq ft when quoted separately, though most fabricators fold it into an all-inclusive rate. If your layout mixes glass with solid infill, ask the vendor to price each panel type separately so you are not paying a blended premium on the cheaper sections. You can browse our services to see how partitions sit alongside doors, windows and facade work in a single fit-out.

What Drives the Aluminium Partition Price Up or Down

Six factors decide where your aluminium partition price in Hyderabad falls within the range: frame section, infill, glass thickness, finish, height and site conditions. Understanding these lets you compare quotes fairly instead of chasing the lowest headline number, which usually hides a thinner frame or non-toughened glass.

• Frame section: heavier 3-inch to 4-inch sections and branded profiles cost more than economy 2-inch sections, but they stay square over long spans and carry heavier doors without sagging
• Infill material: toughened or laminated glass costs more than plain glass, gypsum or ACP board, but is far safer and more durable
• Glass thickness: moving from 5mm to 10mm or 12mm toughened glass can add Rs 120 to Rs 250 per sq ft
• Finish: powder-coating and anodising add Rs 40 to Rs 100 per sq ft over mill finish and resist Hyderabad's dust and monsoon humidity
• Height and glazing: floor-to-ceiling office partitions in HITEC City towers need more framing and stronger glass than a half-height cabin divider
• Site location and access: high-rise offices in Kokapet or the Financial District may attract a small access, hoisting or transport premium

Hardware is the seventh, often hidden driver. Sliding tracks, patch fittings, floor springs, handles and locks are quoted per opening rather than per sq ft, so a partition with three glazed doors can carry Rs 20,000 to Rs 40,000 of fittings before the glass area is even counted.

Hardware Costs: Sliding Kits, Door Closers, Handles and Locks

Hardware typically adds Rs 3,000 to Rs 15,000 per opening on a Hyderabad aluminium partition, and the brand and mechanism you choose make a real difference to daily use. As an authorised dealer for Taiton, Enox and Ozone, we supply these fittings across Telangana and Andhra Pradesh at dealer rates, so you are not paying a middleman markup on a critical, wear-prone component.

• Sliding door tracks and rollers for glass partitions: roughly Rs 3,500 to Rs 12,000 per set depending on load rating
• Overhead and floor-mounted closers: quality floor springs and door closers run Rs 2,500 to Rs 9,000 and keep heavy glass doors self-closing
• Handles, knobs and pulls: from Rs 600 for a basic pull to Rs 6,000 for premium stainless-steel sets
• Locks and access control: simple patch locks to keyless smart locks from Rs 1,200 upwards
• Modular frame connectors and joiners: needed for demountable office layouts that will be reconfigured later

Buying frame and hardware from one source avoids the classic Hyderabad site problem where a cheap door closer fails within a year and cannot be matched to the existing patch fittings. Specifying a rated closer and a load-appropriate sliding kit up front costs a little more but eliminates the most common post-installation complaint on glazed partitions.

GST, Payment Terms and What a Fair Quote Includes

GST on aluminium partition work in Hyderabad is charged at 18 percent, and it is frequently added on top of the quoted per-square-foot rate rather than baked into it. This single line can swing a Rs 1,00,000 job by Rs 18,000, so always confirm whether the number you are given is inclusive or exclusive of tax before you compare vendors.

A fair, comparable quote for the twin cities should clearly list:

• Frame brand, section size (2-inch, 3-inch or 4-inch) and finish (mill, powder-coated or anodised)
• Glass type and thickness, and whether it is toughened or laminated with a manufacturer stamp
• Hardware make and model for every door, including closers, locks and handles
• Installation, transport, hoisting for high-rise sites, and post-installation cleaning
• Warranty terms on the frame, glass and moving hardware

Payment is usually staged: 50 to 70 percent advance on order confirmation, with the balance on installation. For larger office fit-outs in Gachibowli or the Financial District, negotiate a retention of 5 to 10 percent held until snagging is complete. When you are ready, you can get a free quote and we will itemise every line so you can compare vendors on a like-for-like basis.

Worked Cost Examples for Hyderabad and Secunderabad

A typical Hyderabad aluminium partition project costs between Rs 25,000 and Rs 1,80,000 depending on size and specification. Here are four realistic scenarios drawn from jobs across the twin cities, each excluding GST unless the quote states otherwise.

• Home study partition, Kukatpally: 8 ft x 7 ft (56 sq ft) frosted-glass partition at Rs 500 per sq ft is about Rs 28,000
• Shop front divider, Secunderabad: 10 ft x 8 ft (80 sq ft) powder-coated toughened-glass partition at Rs 650 per sq ft is about Rs 52,000
• Cabin partition, Gachibowli office: 12 ft x 8 ft (96 sq ft) toughened-glass partition with a sliding door at Rs 750 per sq ft plus Rs 8,000 hardware is about Rs 80,000
• Conference room, Financial District: 20 ft x 9 ft (180 sq ft) double-glazed acoustic partition at Rs 1,000 per sq ft is about Rs 1,80,000

Add 18 percent GST to each figure unless the quote confirms it is already included. You can see finished installations at a similar scale among our recent projects, which helps set expectations for glass reveals, door alignment and finish before you commit.

Aluminium vs Gypsum vs Wooden Partitions in Hyderabad

Aluminium partitions cost more upfront than plain gypsum but deliver far lower lifetime cost in Hyderabad's dust and monsoon humidity. The right material depends on how long you expect the layout to last and how much daylight you want to keep. Here is how the three common options compare per square foot in 2026.

• Gypsum board partition: Rs 90 to Rs 180 per sq ft, quick to install but needs repainting and swells or stains with moisture
• Wooden or plywood partition: Rs 250 to Rs 600 per sq ft, warm in appearance but prone to termites and swelling in humid weather
• Aluminium-framed glass partition: Rs 350 to Rs 1,200 per sq ft, moisture-proof, demountable and easy to reconfigure

For offices that may be re-planned, aluminium wins because panels can be unclipped and moved rather than demolished, protecting your investment across lease terms. For a designer residence where warmth matters more than flexibility, a hybrid of wood and glass partitions often gives the best of both worlds while keeping rooms bright.

Common Mistakes That Inflate a Partition Bill

The most expensive partition mistakes in Hyderabad are usually specification errors made before installation, not the base rate itself. Avoiding these keeps your final invoice close to the quote and your partition serviceable for a decade or more.

• Comparing quotes on price alone: a Rs 400 per sq ft quote with a 2-inch mill frame and 5mm plain glass is not the same product as a Rs 650 quote with a powder-coated 3-inch frame and 10mm toughened glass
• Ignoring GST until the final bill: always ask whether 18 percent is included so the headline rate is comparable
• Choosing non-toughened glass to save money: it is a safety risk near doors and floors and often fails local building expectations for offices
• Under-speccing door hardware: a cheap closer or under-rated sliding kit on a heavy glass door fails within a year and is costly to retrofit
• Skipping the site survey: floor level, ceiling height and false-ceiling detailing all change the frame quantity, so phone estimates almost always move
• Forgetting acoustics: open-plan HITEC City and Financial District offices often need laminated or double glazing for privacy, which is far cheaper to build in than to add later

Choosing the Right Partition for Hyderabad Conditions

For Hyderabad's hot summers, dusty air and monsoon humidity, choose a powder-coated or anodised aluminium frame with toughened glass for the best balance of value and longevity. These finishes resist corrosion and clean easily, unlike bare mill-finish frames that dull and pit over time.

• For offices needing privacy and sound control, specify double-glazed or laminated glass with EPDM gaskets
• For homes and shops, single 8mm toughened glass in a powder-coated frame balances cost and durability
• For balconies and utility areas exposed to monsoon rain, insist on anodised frames and quality sealants
• For frequently used glass doors, fit a rated floor spring or closer so the door does not sag or slam
• Always confirm the toughened glass carries a manufacturer stamp for safety and warranty

A well-specified aluminium partition should last 12 to 15 years in the twin cities with only gasket and hardware servicing, which is why the slightly higher upfront rate almost always pays back. If you are also planning doors, windows or facade glazing, folding the partition into one order through our aluminium partition service usually secures a better combined rate.

How to Get an Accurate Aluminium Partition Quote in the Twin Cities

The fastest way to get an accurate aluminium partition price in Hyderabad is to share exact dimensions, the number of doors and your preferred finish, then let the vendor complete a site measurement. Rough phone estimates almost always change once the site is checked for level floors, ceiling height and power points.

• Measure the opening width and height, and note whether the partition runs floor-to-ceiling or stops at a false ceiling
• Decide how many doors you need and whether they slide or swing
• Choose glass type early, since toughened glass adds 7 to 10 days of lead time
• Confirm site access for tower floors in HITEC City, Kokapet or the Financial District

Our team surveys sites across Hyderabad, Secunderabad and nearby Telangana and Andhra Pradesh towns, then returns an itemised quote covering frame, glass, hardware and installation. When your drawings are ready, get a free quote and we will turn it around promptly so you can budget with confidence.